this is information on a product in full production. march 2012 doc id 022951 rev 1 1/7 7 STPS5L60-Y automotive power schottky rectifier datasheet ? production data features negligible switching losses low forward voltage drop for higher efficiency low thermal resistance avalanche capability specified aec-q101 qualified ecopack ? 2 compliant component description power schottky rectifier suited for switch mode power supplies and high frequency inverters. this device is intended for use in low voltage output for small battery chargers and battery protection in automotive applications. table 1. device summary i f(av) 5 a v rrm 60 v t j (max) 150 c v f (max) 0.53 v k a smc stps5l60sy www.st.com
characteristics STPS5L60-Y 2/7 doc id 022951 rev 1 1 characteristics to evaluate the conduction losses use the following equation: p = 0.39 x i f(av) + 0.028x i f 2 (rms) table 2. absolute ratings (limiting values) symbol parameter value unit v rrm repetitive peak reverse voltage 60 v i f(rms) forward rms current 15 a i f(av) average forward current t l = 100 c = 0.5 5a i fsm surge non repetitive forward current half wave, single phase t p = 10 ms 150 a p arm repetitive peak avalanche power t p = 1 s t j = 25 c 4000 w t stg storage temperature range -65 to +175 c t j operating junction temperature (1) -40 to +150 c dv/dt critical rate of rise of reverse voltage (rated v r , t j = 25 c) 10000 v/s 1. condition to avoid thermal runaway for a diode on its own heatsink dptot dtj --------------- 1 rth j a ? () ------------------------- - < table 3. thermal parameters symbol parameter value unit r th (j-l) junction to leads 15 c/w table 4. static electrical characteristics symbol parameter tests condit ions min. typ. max. unit i r (1) reverse leakage current t j = 25 c v r = v rrm 0.22 ma t j = 100 c 10 25 t j = 125 c 40 100 v f (1) forward voltage drop t j = 25 c i f = 5 a 0.47 0.52 v t j = 100 c 0.43 0.49 t j = 125 c 0.42 0.48 1. pulse test: tp = 380 s, < 2%
STPS5L60-Y characteristics doc id 022951 rev 1 3/7 figure 1. conduction losses versus average current figure 2. average forward current versus ambient temperature ( = 0.5 ) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6. 0 if(av)(a) pf(av)(w) = 0.05 = 0.1 = 0.2 = 0.5 = 1 t =tp/t tp if(av)(a) 25 50 75 100 125 rth(j-a)=rth(j-l) t =tp/t tp smc rth(j-a)=90c/w tamb(c) 0 1 2 3 4 5 6 0 150 figure 3. normalized avalanche power derating versus pulse duration figure 4. normalized avalanche power derating versus junction temperature 0.001 0.01 0.1 0.01 1 0.1 10 100 1000 1 t (s) p p(t) p (1s) arm p arm 0 1 25 50 75 100 125 150 p(t) p (25c) arm j arm t (c) j figure 5. non repetitive surge peak forward current versus overload duration (maximum values) figure 6. relative variation of thermal impedance junction to ambient versus pulse duration 0 2 4 6 8 10 12 14 1.e-03 1.e-02 1.e-01 1.e+00 ta=25 c ta=75 c ta=125 c i m t =0.5 smc im(a) t(s) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 smc z/r th(j-a) th(j-a) t (s) p
characteristics STPS5L60-Y 4/7 doc id 022951 rev 1 figure 11. thermal resistance junction to ambient versus copper surface under each lead (epoxy printed board fr4, copper thickness = 35 m) figure 7. reverse leakage current versus reverse voltage applied (typical values) figure 8. junction capacitance versus reverse voltage applied (typical values) figure 9. forward voltage drop versus forward current (low level) figure 10. forward voltage drop versus forward current (high level) ir(ma) 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 0 5 10 15 20 25 30 35 40 45 50 55 60 tj=150c tj=125c tj=25c tj=100c tj=75c tj=50c vr(v) c(pf) 100 1000 1 10 100 f=1mhz vosc=30mv tj=25c vr(v) ifm(a) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 tj=25c (maximum values) tj=125c (maximum values) tj=125c (maximum values) tj=125c (typical values) tj=125c (typical values) vfm(v) ifm(a) 0 5 10 15 20 25 30 35 40 45 50 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 tj=25c (maximum values) tj=125c (maximum values) tj=125c (maximum values) tj=125c (typical values) tj=125c (typical values) vfm(v) r (c/w) th(j-a) 0 10 20 30 40 50 60 70 80 90 100 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 smc s (cm2) cu
STPS5L60-Y package information doc id 022951 rev 1 5/7 2 package information epoxy meets ul94, v0 lead-free package in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 12. footprint, dimensions in mm (inches) table 5. smc dimensions ref. dimensions millimeters inches min. max. min. max. a1 1.90 2.45 0.075 0.096 a2 0.05 0.20 0.002 0.008 b (1) 1. dimensions b and c apply to plated leads 2.90 3.20 0.114 0.126 c (1) 0.15 0.40 0.006 0.016 d 5.55 6.25 0.218 0.246 e 7.75 8.15 0.305 0.321 e1 6.60 7.15 0.260 0.281 e2 4.40 4.70 0.173 0.185 l 0.75 1.50 0.030 0.059 e c l e2 e1 d a1 a2 b 8.19 1.54 5.11 1.54 (0.061) (0.201) (0.322) (0.124) (0.061) 3.14
ordering information STPS5L60-Y 6/7 doc id 022951 rev 1 3 ordering information 4 revision history table 6. ordering information order code marking package weight base qty delivery mode stps5l60sy s56y smc 0.245 g 2500 tape and reel table 7. document revision history date revision description of changes 29-mar-2012 1 initial issue
STPS5L60-Y doc id 022951 rev 1 7/7 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
